Remote Sensing and Survey Store

Cart

Your cart is currently empty.

Showing 1 - 9 of 27 result

Show per page

Search

$105.05

HIGH-QUALITY CONSTRUCTION. Lightweight yet durable, the Two-Piece GPS Rover Rod is made of aluminum to provide long-lasting strength and use throughout the years. It’s available in red, yellow and fluorescent yellow colors to suit everyone’s taste. REMOVABLE TIP. The steel tip comes with an included rubber cover to help protect the point and keep it sharp, in addition to assisting in tightening and loosening the tip. This steel tip is removable so that it can be replaced. SIMPLE ASSEMBLY. Made of two sections so you can take it apart for a more convenient transport, the GPS Rover Rod can be easily assembled by screwing one section into the other by twisting each in opposite directions. EASY MOUNTING. The mounting thread at the top of the pole has a standard ?-inch male thread for easy mounting. For both safety and convenience, the GPS rover pole has cable slots to secure cables while the rover is mounted on the pole. COMPLETE SET. Supplies a soft carry bag along with the rover rod for your convenience. To that end, it comes with a vinyl hand grip for added friction and stability in holding the rod, and a 40-minute bubble vial to help ensure accuracy.

$870.00

The Leica GKL341 Professional 5000 Charger is a multi-bay charger for Li-Ion batteries. It can charge four Leica Geosystems Li-Ion batteries at a time and works on a first inserted, first loaded principle. This means that the battery that is first inserted into the charger will be the first one to be charged. It also features an integrated refresh option, which automatically corrects the error of incorrectly shown percentage of remaining power from the batteries.

The Leica GKL341 charger has a total of for bays or battery slots and each has a battery energy indicator. Li-Ion batteries GEB211, GEB212, GEB221, GEB222, GEB241, GEB242, GEB331, and GEB334 are supported. One or two batteries can be fully charged within four hours, while three to four batteries will take up to eight hours of charging to fully charge all of it. This Leica professional 5000 charger is made of durable plastic and has the IP30 protection class, meaning it is protected from tools and wires greater than 2.5 millimeters.

$23,500.00

Introducing Leica GS18 I, a versatile, survey-grade GNSS RTK rover with Visual Positioning. Designed for surveying professionals to measure points which previously could not be measured with a GNSS rover easily and accurately. Now, you can quickly capture the site in images and measure points from them, either in the field or later in the office. For GS18, I means imaging.


Sensor fusion of GNSS, IMU and a camera come together to create Visual Positioning technology, resulting in a GNSS RTK rover so powerful that it enables you to measure what you see. GS18 I has all the functionality of the Leica GS18 T: in addition to Visual Positioning, users can for example map points with either tilted or levelled pole.


- Measure points with obstructed view to the sky more efficiently and easily.
- Capture points you couldn’t reach before with a GNSS rover.
- Gain more flexibility and control, with no need to use additional time-consuming equipment.
- Map hundreds of points with survey-grade accuracy within minutes.
- Capture the scene quickly and decide later, what should be measured – even if the scene subsequently changes or disappears.
- Tap on an image to measure a point in the field or in the office.
- Quick and thorough so you catch every detail.

INNOVATIVE
GS18 I is an accurate and easy-to-use GNSS RTK Rover. It utilizes highly innovative Visual Positioning technology based on seamless integration of GNSS, IMU, and a camera. It enables you to measure points in survey-grade accuracy from images either in the field or in the office. Alternatively, create point clouds from captured images using Leica Infinity to expand possibilities even further.

FAST
Designed to measure a large number of points efficiently. The GS18 I allows you to capture images and measure hundreds of points within minutes with no need to physically reach the point. Time spent on-site is reduced and revisits minimized – once the site is captured, you can measure all detail whenever you want to.

VERSITILE
Imaging power has changed the rules of the game. By having the power to measure what you see, you can now reach places you couldn’t before without the need to switch tools or climb through obstacles. This gives you flexibility in the field, frees up equipment and crews, truly maximizes productivity, and increasing profits.https://play.vidyard.com/Q2PsfNX5ZzHdLFwGUJyvCb.html?

ENGAGING SOFTWARE
The Leica Captivate field software is the perfect companion for the GS18 I. With easy-to-use apps, all measured and design data can be viewed and used, providing you with a clear understanding of your data in 2D and 3D view. Captivate spans industries and applications with little more than a simple tap, regardless of whether you work with GNSS, total stations or both.

TILT COMPENSATION
Based on sensor fusion of IMU and GNSS, GS18 I’s tilt compensation is immune to magnetic disturbances and it works immediately without calibration. With the GS18 I, surveyors have the flexibility to measure points with a levelled pole and still save the tilt values of each measurement. That way you have the trust that what was measured, is correct.

INTERNAL MEMORY
Users with any GS18 model have the flexibility to log raw data into an SD card or the internal memory.

4G LTE & EXCELLENT MEASUREMENT QUALITY
Tracking multi-frequency signals comes as standard with all Leica Geosystems GS sensors. Combined with an excellent GNSS antenna element and a position update rate of 20 Hz, GS18 I ensures reliable measurement quality.

IMPROVED PERFORMANCE
Multipath reduction and interference mitigation options in Captivate boost GNSS signal tracking quality under harsh environments, which improves RTK availability and accuracy. Also, an interference toolkit will enable filtering to remove in- and out-of-band distortions for even more robust GNSS signal tracking.

GS18 I LTE&UHF Performance GNSS SmartAntenna for NAFTA. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems, IMU module and camera. Easily upgradeable with GS18 options (e.g. Glonass, Galileo).

$23,500.00

Introducing Leica GS18 I, a versatile, survey-grade GNSS RTK rover with Visual Positioning. Designed for surveying professionals to measure points which previously could not be measured with a GNSS rover easily and accurately. Now, you can quickly capture the site in images and measure points from them, either in the field or later in the office. For GS18, I means imaging.
Sensor fusion of GNSS, IMU and a camera come together to create Visual Positioning technology, resulting in a GNSS RTK rover so powerful that it enables you to measure what you see. GS18 I has all the functionality of the Leica GS18 T: in addition to Visual Positioning, users can for example map points with either tilted or levelled pole.
- Measure points with obstructed view to the sky more efficiently and easily.
- Capture points you couldn’t reach before with a GNSS rover.
- Gain more flexibility and control, with no need to use additional time-consuming equipment.
- Map hundreds of points with survey-grade accuracy within minutes.
- Capture the scene quickly and decide later, what should be measured – even if the scene subsequently changes or disappears.
- Tap on an image to measure a point in the field or in the office.
- Quick and thorough so you catch every detail.

INNOVATIVE
GS18 I is an accurate and easy-to-use GNSS RTK Rover. It utilizes highly innovative Visual Positioning technology based on seamless integration of GNSS, IMU, and a camera. It enables you to measure points in survey-grade accuracy from images either in the field or in the office. Alternatively, create point clouds from captured images using Leica Infinity to expand possibilities even further.

FAST
Designed to measure a large number of points efficiently. The GS18 I allows you to capture images and measure hundreds of points within minutes with no need to physically reach the point. Time spent on-site is reduced and revisits minimised – once the site is captured, you can measure all detail whenever you want to.

VERSITILE
Imaging power has changed the rules of the game. By having the power to measure what you see, you can now reach places you couldn’t before without the need to switch tools or climb through obstacles. This gives you flexibility in the field, frees up equipment and crews, truly maximizes productivity, and increasing profits.https://play.vidyard.com/Q2PsfNX5ZzHdLFwGUJyvCb.html?

ENGAGING SOFTWARE
The Leica Captivate field software is the perfect companion for the GS18 I. With easy-to-use apps, all measured and design data can be viewed and used, providing you with a clear understanding of your data in 2D and 3D view. Captivate spans industries and applications with little more than a simple tap, regardless of whether you work with GNSS, total stations or both.

TILT COMPENSATION
Based on sensor fusion of IMU and GNSS, GS18 I’s tilt compensation is immune to magnetic disturbances and it works immediately without calibration. With the GS18 I, surveyors have the flexibility to measure points with a levelled pole and still save the tilt values of each measurement. That way you have the trust that what was measured, is correct.

INTERNAL MEMORY
Users with any GS18 model have the flexibility to log raw data into an SD card or the internal memory.

4G LTE & EXCELLENT MEASUREMENT QUALITY
Tracking multi-frequency signals comes as standard with all Leica Geosystems GS sensors. Combined with an excellent GNSS antenna element and a position update rate of 20 Hz, GS18 I ensures reliable measurement quality.

IMPROVED PERFORMANCE
Multipath reduction and interference mitigation options in Captivate boost GNSS signal tracking quality under harsh environments, which improves RTK availability and accuracy. Also, an interference toolkit will enable filtering to remove in- and out-of-band distortions for even more robust GNSS signal tracking.

GS18 I LTE&UHF Performance GNSS SmartAntenna. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems, IMU module and camera. Easily upgradeable with GS18 options (e.g. Glonass, Galileo).

$16,200.00

The Leica GS18 is a self-learning GNSS smart antenna. GS18 inherits all features of the Leica GS18 T except tilt compensation. However, the GS18 grows with your business: upgrade it to a tilt compensating system at any time.
The GS18 is an excellent companion to a surveyor that primarily works with a network RTK such as HxGN SmartNet. Like most of the Leica Geosystems GNSS smart antennas, the GS18 works as a rover and a base.

TILT COMPENSATION UPGRADE
Whenever you need the efficiency and safety improvements gained from tilted measurements, upgrade your GS18 to a tilt compensating rover. Any Leica Geosystems service can do the upgrade at any time.

ENGAGING SOFTWARE
The Leica Captivate field software is the perfect companion for the GS18. With easy-to-use apps, all measured and design data can be viewed and used, providing you with a clear understanding of your data in 2D and 3D view. Captivate spans industries and applications with little more than a simple tap, regardless of whether you work with GNSS, total stations or both.

IMPROVED PERFORMANCE
Multipath reduction and interference mitigation options in Captivate boost GNSS signal tracking quality under harsh environments, which improves RTK availability and accuracy. Also, an interference toolkit will enable filtering to remove in- and out-of-band distortions for even more robust GNSS signal tracking.

4G LTE & EXCELLENT MEASUREMENT QUALITY
Tracking multi-frequency signals comes as a standard to all Leica Geosystems GS sensors. Combined with an excellent GNSS antenna element and a position update rate of 20 Hz, the GS18 ensures reliable measurement quality.

INTERNAL MEMORY
Users with any GS18 model have the flexibility to log raw data into an SD card or the internal memory.

GS18 LTE&UHF Performance GNSS SmartAntenna for NAFTA. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems. Easily upgradeable with GS18 options (e.g. Glonass, Galileo, GS18 to GS18 T).

$16,200.00

The Leica GS18 is a self-learning GNSS smart antenna. GS18 inherits all features of the Leica GS18 T except tilt compensation. However, the GS18 grows with your business: upgrade it to a tilt compensating system at any time.
The GS18 is an excellent companion to a surveyor that primarily works with a network RTK such as HxGN SmartNet. Like most of the Leica Geosystems GNSS smart antennas, the GS18 works as a rover and a base.

TILT COMPENSATION UPGRADE
Whenever you need the efficiency and safety improvements gained from tilted measurements, upgrade your GS18 to a tilt compensating rover. Any Leica Geosystems service can do the upgrade at any time.

ENGAGING SOFTWARE
The Leica Captivate field software is the perfect companion for the GS18. With easy-to-use apps, all measured and design data can be viewed and used, providing you with a clear understanding of your data in 2D and 3D view. Captivate spans industries and applications with little more than a simple tap, regardless of whether you work with GNSS, total stations or both.

IMPROVED PERFORMANCE
Multipath reduction and interference mitigation options in Captivate boost GNSS signal tracking quality under harsh environments, which improves RTK availability and accuracy. Also, an interference toolkit will enable filtering to remove in- and out-of-band distortions for even more robust GNSS signal tracking.

4G LTE & EXCELLENT MEASUREMENT QUALITY
Tracking multi-frequency signals comes as a standard to all Leica Geosystems GS sensors. Combined with an excellent GNSS antenna element and a position update rate of 20 Hz, the GS18 ensures reliable measurement quality.

INTERNAL MEMORY
Users with any GS18 model have the flexibility to log raw data into an SD card or the internal memory.

GS18 LTE&UHF Performance GNSS SmartAntenna. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems. Easily upgradeable with GS18 options (e.g. Glonass, Galileo, GS18 to GS18 T).

$20,400.00

You no longer need to hold the pole vertical to level the bubble with the new Leica GS18 T, the fastest and easiest-to-use GNSS smart antenna and RTK rover. This latest innovation combines GNSS and inertial micro units (IMUs) to be the first true tilt compensation solution immune to magnetic disturbances and is calibration-free.
As you no longer need to watch and level the bubble, you can focus on your task at hand and save time over conventional surveying practices. Uninterrupted, accurate positioning when surrounded by or in close proximity to metallic objects – measure where others simply couldn’t before. The GS18 T works directly out of the box without any calibration procedure.

Engaging software
The GS18 T RTK rover combines seamlessly with the completely engaging Leica Captivate software for a powerfully immersive experience. Through the simplicity of touch, management of complex data is made extraordinarily enjoyable and actionable. Leica Captivate spans industries and applications with little more than a simple swipe, regardless of whether you work with GNSS, total stations or both.

Infinite possibilities
While Captivate captures and models data in the field, Leica Infinity software processes the information back in the office. A smooth data transfer ensures the project stays on track. Captivate and Infinity work in conjunction to join previous survey data and edit projects faster and more efficiently.
With integrated quality assurance, this GNSS RTK rover records how the pole was levelled during the measurement and stores the values, ensuring measurement traceability and complete quality reporting.

Customer care at a click
Through Active Customer Care, a global network of experienced professionals is only a click away to expertly guide you through any problem.
- Eliminate delays with superior technical service
- Finish jobs faster with excellent customer support
- Avoid costly site revisits with online service to send and receive data directly from the field. Control your costs with a tailored Customer Care Packages, giving you peace of mind you’re covered anywhere, anytime.

Powerful handheld devices
In a controller or tablet, take your entire office on the go when you discover the power to overcome any environment from the palm of your hand. The Leica CS20 controller and Leica CS35 tablet provide the ultimate in control and convenience with complete mobility. Touchscreen technology allows for comfortable and quick data processing while a stunning 3D view transforms your GNSS experience. DOWNLOADS

GS18 T LTE&UHF Performance GNSS SmartAntenna for NAFTA. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems and IMU module. Easily upgradeable with GS18 options (e.g. Glonass, Galileo).

$20,400.00

You no longer need to hold the pole vertical to level the bubble with the new Leica GS18 T, the fastest and easiest-to-use GNSS smart antenna and RTK rover. This latest innovation combines GNSS and inertial micro units (IMUs) to be the first true tilt compensation solution immune to magnetic disturbances and is calibration-free.
As you no longer need to watch and level the bubble, you can focus on your task at hand and save time over conventional surveying practices. Uninterrupted, accurate positioning when surrounded by or in close proximity to metallic objects – measure where others simply couldn’t before. The GS18 T works directly out of the box without any calibration procedure.

Engaging software
The GS18 T RTK rover combines seamlessly with the completely engaging Leica Captivate software for a powerfully immersive experience. Through the simplicity of touch, management of complex data is made extraordinarily enjoyable and actionable. Leica Captivate spans industries and applications with little more than a simple swipe, regardless of whether you work with GNSS, total stations or both.

Infinite possibilities
While Captivate captures and models data in the field, Leica Infinity software processes the information back in the office. A smooth data transfer ensures the project stays on track. Captivate and Infinity work in conjunction to join previous survey data and edit projects faster and more efficiently.
With integrated quality assurance, this GNSS RTK rover records how the pole was levelled during the measurement and stores the values, ensuring measurement traceability and complete quality reporting.

Customer care at a click
Through Active Customer Care, a global network of experienced professionals is only a click away to expertly guide you through any problem.
- Eliminate delays with superior technical service
- Finish jobs faster with excellent customer support
- Avoid costly site revisits with online service to send and receive data directly from the field. Control your costs with a tailored Customer Care Packages, giving you peace of mind you’re covered anywhere, anytime.

Powerful handheld devices
In a controller or tablet, take your entire office on the go when you discover the power to overcome any environment from the palm of your hand. The Leica CS20 controller and Leica CS35 tablet provide the ultimate in control and convenience with complete mobility. Touchscreen technology allows for comfortable and quick data processing while a stunning 3D view transforms your GNSS experience. DOWNLOADS

GS18 T LTE&UHF Performance GNSS SmartAntenna. Geodetic 555 channels GNSS receiver with integrated LTE and UHF RTK modems and IMU module. Easily upgradeable with GS18 options (e.g. Glonass, Galileo).

$245.00

Leica Hard Case for GS10/GS25 receiver, CS Field Controller/Tablet and Accessories for a Base or Rover Setup.

translation missing: en.general.search.loading